If you are preparing for the FE Electrical and Computer exam, the first number you want is the honest one: how many people like you pass it. NCEES publishes that number every year, split by whether it was the candidate's first attempt and by whether they hold a degree from an EAC/ABET-accredited program. This page collects the FE Electrical and Computer figures from the last six NCEES annual reports, shows how they compare with the other six disciplines, and explains what actually moves them.
Key statistic: In NCEES’s latest report (2023–24 exam year), 62% of first-time FE Electrical and Computer takers passed (5,132 sat it for the first time). Among first-time takers with an EAC/ABET bachelor’s degree the rate was 64%; among other first-time takers, 53%. Repeat takers passed at 30%.
The FE Electrical and Computer pass rate in the latest NCEES report
Roughly 3,200 people passed FE Electrical and Computer on their first attempt in a single exam year. That makes it the third-largest FE exam by volume, behind Civil and Mechanical, and the pass rate is a population statistic over that whole group: graduates who prepared for three months and graduates who walked in cold, candidates sitting the exam in their senior year and candidates ten years out of school. The splits NCEES publishes are more useful than the headline, because they tell you which group you are in.
View the data as a table
| Taker group | Volume | Pass rate |
|---|---|---|
| First time, EAC/ABET bachelor’s degree | 3,967 | 64% |
| First time, all takers | 5,132 | 62% |
| First time, other takers | 1,165 | 53% |
| Repeat, all takers | 1,809 | 30% |
| Repeat, EAC/ABET bachelor’s degree | 1,321 | 31% |
| Repeat, other takers | 488 | 27% |
Two things in that chart matter more than the headline. First, the degree split: candidates from EAC/ABET-accredited programs pass at 64%, other first-time takers at 53%, a gap of 11 points. NCEES does not say why, and the “other” group mixes graduates of non-accredited and foreign programs with people who simply left the education field blank, so read it as a signal about preparation and recency of coursework rather than a verdict on any degree. Second, the attempt split: repeat takers pass at 30%, 32 points below first-time takers, even though NCEES grades both to the same standard. The exam does not get harder the second time; the candidates who return are, on average, the ones whose first preparation did not work, and most of them return with the same preparation.
How FE Electrical and Computer compares with the other disciplines
Electrical and Computer ranks fifth of the seven disciplines: behind Chemical, Industrial and Systems, Mechanical and Environmental, and ahead of only Civil and Other Disciplines. Among the three large exams it has the lowest first-time rate, six points under Mechanical and two above Civil.
View the data as a table
| FE Discipline | First-time, all takers | First-time, EAC/ABET degree | Repeat takers | First-time volume |
|---|---|---|---|---|
| FE Chemical | 72% | 73% | 34% | 1,847 |
| FE Industrial and Systems | 68% | 73% | 25% | 525 |
| FE Mechanical | 68% | 71% | 35% | 10,487 |
| FE Environmental | 67% | 70% | 36% | 2,359 |
| FE Electrical and Computer | 62% | 64% | 30% | 5,132 |
| FE Civil | 60% | 63% | 33% | 15,619 |
| FE Other Disciplines | 59% | 61% | 27% | 2,374 |
| All disciplines (weighted) | 64% | — | 33% | 38,343 |
The ranking is stable from year to year: Chemical and Environmental at the top, Civil and Other Disciplines at the bottom, Electrical in the lower half. The full seven-discipline picture, with the first-time and repeat gap for every exam, is on the FE exam pass rates page; the FE Mechanical figures have their own page.
Six years of FE Electrical and Computer pass rates
One report is a snapshot. Six are a trend, and the trend for FE Electrical and Computer is not flat. In the 2018–19 exam year 64% of first-time takers passed (67% with an EAC/ABET degree); in 2023–24 it was 62% (64%). The first-time rate peaked in 2020–21 at 66% and bottomed in 2022–23 at 61%. Repeat takers moved between 29% and 35% over the same period. Volume fell to 3,613 first-time takers in the 2019–20 year, when test centers closed for part of the spring, and has since climbed back to 5,132.
View the data as a table
| Exam year | First-time, all | First-time, EAC/ABET | First-time, other | Repeat | First-time volume |
|---|---|---|---|---|---|
| 2018–19 | 64% | 67% | 56% | 31% | 5,041 |
| 2019–20 | 65% | 69% | 56% | 35% | 3,613 |
| 2020–21 | 66% | 69% | 54% | 33% | 4,312 |
| 2021–22 | 63% | 66% | 53% | 30% | 3,793 |
| 2022–23 | 61% | 64% | 53% | 29% | 4,257 |
| 2023–24 | 62% | 64% | 53% | 30% | 5,132 |
NCEES does not publish causes and this page will not invent one. Two facts sit inside the window, though. The current FE Electrical and Computer specification took effect with the July 2020 examinations, so the earlier years were tested against a different set of knowledge areas. And NCEES sets the passing standard by subject-matter judgment, not by a target percentage of examinees: in its own words, it “scores each exam with no predetermined percentage of examinees that should pass or fail.” A falling pass rate therefore means the candidate pool is clearing a fixed bar less often, not that the bar was raised to fail more people.
What the pass rate does not tell you
Three things about NCEES scoring change how you should read every number above. The exam is reported as pass or fail only, with a diagnostic report by knowledge area for candidates who fail. The score is the count of correct answers, with no deduction for wrong ones and no partial credit on any item type, converted to a scaled score that adjusts for differences between forms; NCEES does not publish the passing score because it varies slightly with form difficulty, so “you need 70%” and similar rules of thumb have no official basis. And first-time and repeat takers are graded to exactly the same standard, which is why the repeat gap is a fact about preparation, not about the exam.
Where FE Electrical and Computer candidates lose the exam
FE Electrical and Computer is the widest of the FE exams: seventeen knowledge areas under the current NCEES specification, from Laplace transforms to software engineering. Mathematics and Circuit Analysis can carry 11 to 17 questions each, Power Systems and Digital Systems 8 to 12, Electronics 7 to 11; those five areas alone span 45 to 69 questions. The computer-side areas — Computer Networks, Computer Systems, Software Engineering — are small individually but add up to 13 to 20 questions, and they are the ones power and electronics graduates skip. The FE Electrical and Computer exam guide lists every area with its range and a study order.
The recurring technical leaks are narrow: rad/s against Hz in a filter or Bode question, peak where the question gave RMS, a dropped sign on a dependent source, a three-phase relation applied line-to-line when the data was line-to-neutral. They cost a question each, and a candidate who is a few points short has usually lost five or six of them across areas that felt comfortable. Timed practice by knowledge area is where they show up before the exam does.
The repeat trap. 30% of FE Electrical and Computer repeat takers pass. The ones who do almost always changed something concrete: a study plan built backwards from the exam date, timed practice by knowledge area instead of re-reading, and the Handbook open during every session so that finding a formula is no longer a search on exam day. Retaking with the same preparation is the most expensive way to get the same result, and NCEES allows one attempt per testing window and three in twelve months.
How to be on the right side of the number
- Find out which group you are in before you plan. Ten timed questions across the knowledge areas tell you more than any average: take the free FE Electrical diagnostic and rank your weak areas.
- Size the effort from the NCEES ranges, not from fear. The FE Electrical and Computer exam guide lists every knowledge area with its question range and an order to study them in.
- Plan backwards from the exam date and expect to miss sessions. The day-by-day planning guide shows how to build the calendar and what to do when a week goes wrong.
- Drill by knowledge area, under time, with the Handbook open. Start with the free FE Electrical practice problems, each with a worked solution and the Handbook page behind it; put what you missed on flashcards.
- Take a full-length mock every two weeks from week four. 110 questions, 5 hours and 20 minutes, the break where NCEES puts it. The mocks are what tell you whether you have moved from the 53% group to the 64% group.
Prepare against the real specification
1,200+ FE Electrical and Computer questions across every NCEES knowledge area, a CBT simulator that runs the real clock with the scheduled break, an AI tutor for any problem, and analytics that show which areas are costing you points.
See the FE Electrical PlatformConclusion
62 out of every 100 first-time FE Electrical and Computer takers pass, 64 out of 100 when they come from an accredited program, and 30 out of 100 when they are back for a second try. The number has drifted down over six NCEES reports, from 64% to 62%, against a passing standard that NCEES fixes by judgment rather than by quota. None of that is a verdict on you. The groups that pass at the highest rates are the ones whose preparation was recent, structured and timed, and every one of those is a choice you can still make.
Sources: NCEES, Squared: A Year in Numbers, FE exam pass-rate tables in the 2019, 2020, 2021, 2022, 2023 and 2024 reports; NCEES, Examinee Guide (scoring, scaled scores, pass/fail reporting, attempt limits); NCEES, FE Electrical and Computer exam specifications (effective July 2020); NCEES, FE exam.